Lubrita PAO Synthetic Gear Oil 320(208L,цена за литр)

Описание

В Молдове,Lubrita PAO Synthetic Gear Oil 320
DIN 51517-3 CLP  US Steel 224  AGMA 250.04/9005-D94  David Brown S1.53.101  FlenderLubrita PAO Synthetc Gear Oil 320 NS-IGO-4150
Synthetc industrial gear oil
Product Descripton and Benefts
A synthetc industrial gear oil based on synthesized hydrocarbons under additon of special additves the
following propertes are obtained:
•  a natural high viscosity index
•  excellent high and low temperature propertes
•  a very good resistance towards high pressures and shock loads
•  a high resistance to ‘micro-pitng’
•  a high resistance against corrosion and oxidaton
•  a long service life
•  a strong reducton of wear
Applicaton
This synthetc oil is very suitable for the lubricaton of heavy loaded mechanical gearboxes and bearings with
a high thermal load. In comparison with mineral industrial gear oils a substantal extension of the oil drain
interval is possible. This oil is compatble with all seal materials and paints normally specifed for use with
mineral oils. So no special change-over procedure is necessary.
Lubrita PAO Synthetc Gear Oil 320 meets the following performance specifcatons:
Meets the requirements of  DIN 51517, Part 3(CLP)  US Steel 224
 AGMA 250.04, 9005-D94  David Brown S 1.53.101  Flender
Typical Analysis
Property Unit Typical Value
Colour 1.0
Density @15°C kg/ 0,859
Viscosity 40 °C mm2
/s 320,00
Viscosity 100 °C mm²/s 35,50
Viscosity Index 162
Flash Point COC  °C 208
Pour Point  °C -39
Acid number  mgKOH/g 1,10
Synthetc industrial gear oils
Technical Data Sheet
Health and Safety
Based on available informaton, this product is not expected to produce adverse efects on health when used for the intended applicaton and
the recommendatons provided in the Material Safety Data Sheet (MSDS) are followed. MSDS’s are available upon request through your sales
contract ofce, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take
care to protect the environment. Lubrita check oil level design is trade mark of PMM Ltd. or one of it’s subsidaries.
CLP PAO, Synthetic CLP, Synth CLP - редукторное масло на синтетической(ПАО) основе класса CLP по DIN 51517-3(часть 3) - например серия Total Carter SH.
В промышленных трансмиссиях - редукторах, применяются специальные индустриальные масла - редукторные(класс CLP), например Total Carter EP. Существуют физиологически безопасные(пищевые) - соответствуют стандарту NSF-1
Редукторные масла разделяют:
По типу базового масла:
1.Минеральные - Total Carter EP (CLP)
2.Синтетические на основе полиальфаолефинов(ПАО, англ. PAO) - Total Carter SH (CLP HC, CLP PAO)